What kind of vehicles is this camshaft best suited for?

This Rollin' Thunder camshaft is ideal for daily drivers, trucks, vans, and 4x4s. It's designed to provide smooth idling while delivering a significant improvement in throttle response and torque for everyday use.

What components should I pair with this camshaft for best results?

Edelbrock recommends matching this camshaft with their Performer manifolds for optimal performance from off-idle to 5500 rpm. For maximum power gains, it was tested with the Pro-Flo XT EFI system and Performer E-Tec cylinder heads, achieving 440 HP and 425 Ft Lbs of Torque.

What specific parts are included with this camshaft?

This camshaft comes complete with flat tappet lifters, assembly lube, and detailed installation instructions. It is designed for use with a high stall torque converter and stock ratio rocker arms.

Edelbrock Camshaft Perf Plus Hyd Roller SBC 1987 and Later Wide Center EFI

1 / 4

Specifications

Brand: Edelbrock
Part #: 2205
UPC: 85347022052

Edelbrock Camshaft Perf Plus Hyd Roller SBC 1987 and Later Wide Center EFI

Name: Edelbrock Camshaft Perf Plus Hyd Roller SBC 1987 and Later Wide Center EFI
Brand: Edelbrock
SKU: edelbrock-edelbrock-camshaft-perf-plus-hyd-roller-sbc-1987-and-later-wide-center-t14-127945
Price: 578.91 USD
Availability: BackOrder

$578.91

On Backorder

Order now to reserve yours — we'll ship as soon as stock arrives. Full refund if we're unable to fulfill.

Edelbrock Camshaft Perf Plus Hyd Roller SBC 1987 and Later Wide Center EFI. Improves low-end to mid-range torque.

Key Features

Fits 1987 and later 283-400 V8 Small Block Chevy engines.
Designed to produce optimum torque from the low-end to the mid-range.
Smooth idling camshaft suitable for daily drivers, trucks, vans, and 4x4s.
Offers a major improvement in throttle response and torque.
Intake duration is 234 degrees, exhaust duration is 238 degrees.
Intake lift is .539 inches, exhaust lift is .548 inches.

⚠️ CA WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Learn more

Secure CheckoutFast Shipping631-982-0042

Product Details

Edelbrock has been a well-known name in performance parts for a long time, and their Rollin' Thunder camshafts are built to give your engine a serious boost in the torque department. This particular camshaft, part number 2205, is designed for 1987 and later 283-400 cubic inch Small Block Chevy V8 engines. If you're looking to get more pulling power from the low-end up through the mid-range, this is a solid option.

This camshaft is intended for daily drivers, trucks, vans, and 4x4s that need smooth idling but also a noticeable improvement in throttle response and overall torque. Edelbrock suggests matching these cams with their Performer manifolds for optimal performance in the off-idle to 5500 rpm range. When paired with specific Edelbrock components like the Pro-Flo XT EFI system and Performer E-Tec cylinder heads, this cam helped achieve 440 horsepower and 425 ft-lbs of torque in testing, showing its potential for significant gains.

For installation, you'll need to use a high stall torque converter and stock ratio rocker arms. The specifications for this hydraulic roller camshaft include an intake duration of 234 degrees and an exhaust duration of 238 degrees, with lifts of .539 inches on the intake and .548 inches on the exhaust. The lobe separation is set at 114 degrees, and the intake centerline is at 110 degrees, contributing to its smooth idle and strong mid-range pull. This camshaft comes complete with flat tappet lifters, assembly lube, and installation instructions to help you get it installed correctly.