Edelbrock Perf RPM Cam and Lifters Kit Chev 283-400

This is the Edelbrock Performer RPM Cam and Lifters Kit, part number 7102, designed for 1957 through 1986 small-block Chevrolet V8 engines. If you're looking to get more power out of your classic Chevy, this kit is built to deliver improved performance across a wide RPM range, from 1500 all the way up to 6500 rpm. It's a popular choice for street applications where you want a noticeable bump in horsepower without sacrificing too much low-end torque.

What sets this kit apart is how it's matched for optimal results. Edelbrock dyno-tested this camshaft with their Performer RPM manifolds and specific cylinder heads to achieve significant gains, like 410 horsepower and 408 ft-lbs of torque on a 350 engine. The camshaft itself features more lift and duration than typical street cams, with an intake duration of 234 degrees and an exhaust duration of 244 degrees at .050 lift. This translates to better airflow into and out of your engine. You'll also get a solid 10 to 12 inches of manifold vacuum at idle, which is good for drivability. This kit comes complete with hydraulic flat tappet lifters, taking the guesswork out of selecting compatible components.

This kit is a well-built option for enthusiasts looking to enhance their engine's breathing and power output. Remember, this part is not CARB approved and cannot be shipped to California. Always refer to the manufacturer's installation instructions for proper setup and any additional components you might need.