What kind of performance gains can I expect with this Edelbrock cam kit?

On a 390 engine, when used with Edelbrock's #7105 intake and #60069 cylinder heads, this kit produced 418 horsepower and 434 ft-lbs of torque. It's designed to provide power from 1500 to 6500 RPM for high-performance street applications.

Does this kit include everything I need to install the camshaft?

This kit includes the Performer RPM camshaft and matching hydraulic flat tappet lifters. You will need to source other necessary installation components such as gaskets, timing set, and potentially valve springs and retainers depending on your cylinder heads.

Is this camshaft legal for use in California?

No, this camshaft is not CARB approved and cannot be shipped to California due to emissions regulations.

Edelbrock Perf RPM Cam and Lifters Kit Ford FE 352-428

1 / 7

Specifications

Brand: Edelbrock
Part #: 7106
UPC: 85347071067

Edelbrock Perf RPM Cam and Lifters Kit Ford FE 352-428

Name: Edelbrock Perf RPM Cam and Lifters Kit Ford FE 352-428
Brand: Edelbrock
Price: 513.56 USD
Availability: InStock

$513.56

On Backorder

Order now to reserve yours — we'll ship as soon as stock arrives. Full refund if we're unable to fulfill.

Edelbrock Perf RPM Cam and Lifters Kit Ford FE 352-428. Boosts power from 1500-6500 RPM for street performance.

Key Features

Fits Ford FE V8 engines including 332, 352, 360, 390, 406, 410, 427, and 428 cubic inch displacements.
Designed for high-performance street applications, providing power from 1500 to 6500 RPM.
Camshaft specifications include 236 degrees duration at .050 lift for both intake and exhaust.
Features .572 inches of lift at the valve for both intake and exhaust.
Includes hydraulic flat tappet lifters, taking the guesswork out of component matching.
Dyno-matched to Performer RPM manifolds for optimized high-RPM horsepower and acceptable low-end torque.

⚠️ CA WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Learn more

Secure CheckoutFast Shipping631-982-0042

Will this fit your vehicle?

Product Details

Edelbrock has been a well-known name in performance parts for a long time, and their Performer RPM Camshaft Kits are built to help you get more out of your engine. This kit, part number 7106, is specifically designed for Ford FE V8 engines, covering displacements from 352 all the way up to 428 cubic inches. If you're looking to improve your street performance and want a noticeable bump in power, this kit is a solid option.

What makes this kit stand out is how it's matched for a specific operating range. Edelbrock states that these Performer RPM cams are dyno-matched to their Performer RPM manifolds to give you that high-RPM horsepower you're after, while still keeping decent low-end torque. This means you get a broad powerband, with the kit designed to produce power from 1500 all the way up to 6500 RPM. The camshaft itself features a duration of 236 degrees on both the intake and exhaust sides at .050 lift, with a lift of .572 inches at the valve for both. It also has a 108-degree lobe separation angle. This setup results in about 11 inches of manifold vacuum at idle, which is more than many other street cams, indicating a well-rounded performance profile.

When you purchase this kit, you're not just getting the camshaft; it also includes hydraulic flat tappet lifters. This means you have the essential components needed to get your engine breathing better and performing at a higher level. It's a comprehensive package aimed at taking the guesswork out of selecting a camshaft and lifter combination for your Ford FE engine, especially for those building a high-performance street machine.