Why do I need a track bar bracket after lifting my Jeep?

When you lift a Jeep Wrangler, the rear axle shifts to one side because the track bar is no longer at the correct angle. This bracket repositions the track bar mounting point to re-center the axle under the vehicle, which is crucial for proper alignment and handling.

What is involved in installing a weld-on bracket?

Installing a weld-on bracket requires welding it directly to the Jeep's frame or axle, depending on the specific application. This is a permanent modification and should be performed by someone experienced with welding, as improper welds can compromise structural integrity.

Does this bracket come with hardware?

This product is a weld-on bracket and does not include hardware for installation. You will need to source appropriate hardware and have welding equipment and expertise to install it.

Fabtech 07-18 Jeep JK 4WD 3-5in Rear Track Bar Bracket - Weld On

1 / 2

Specifications

Brand: Fabtech
Part #: FTS24114
UPC: 674866101654

Fabtech 07-18 Jeep JK 4WD 3-5in Rear Track Bar Bracket - Weld On

Name: Fabtech 07-18 Jeep JK 4WD 3-5in Rear Track Bar Bracket - Weld On
Brand: Fabtech
SKU: fabtech-fabtech-07-18-jeep-jk-4wd-3-5in-rear-track-bar-bracket-weld-on-t14-223751
Price: 115.82 USD
Availability: BackOrder

$115.82

On Backorder

Order now to reserve yours — we'll ship as soon as stock arrives. Full refund if we're unable to fulfill.

Fits 2007-2017 Jeep Wrangler JK. This weld-on rear track bar bracket from Fabtech is for 3-5 inch lifts.

Key Features

Fits 2007-2017 Jeep Wrangler JK 4WD.
Designed for vehicles with a 3-5 inch suspension lift.
This is a weld-on rear track bar bracket.
Helps to re-center the rear axle after lifting the vehicle.
Constructed from durable steel for strength.

⚠️ CA WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Learn more

Secure CheckoutFast Shipping631-982-0042

Fits these vehicles

Jeep Wrangler 2007-2017
Jeep Wrangler JK 2018

Product Details

If you're lifting your 2007-2017 Jeep Wrangler JK between 3 and 5 inches, you'll likely need to address the rear track bar. This weld-on bracket from Fabtech is designed to reposition your rear track bar after a lift, helping to keep your axle centered under the vehicle. Proper track bar alignment is important for stable handling and to prevent tire rubbing on the fender well.

This bracket is made from solid steel and requires welding to install, making it a more permanent solution than a bolt-on option. The engineers at Fabtech have over 20 years of experience in suspension design, and this bracket is a result of that expertise. It's built to handle the demands of off-road use, ensuring your axle stays properly aligned even on rough terrain.