Hotchkis 1964 1/2-66 Ford Mustang Stage 2 TVS Kit *For Use with Rear Ends with 2.8in OD Axle Tubes*

If you're looking to completely transform the handling and stance of your 1964-1966 Ford Mustang, this Stage 2 Total Vehicle System (TVS) kit from Hotchkis is designed to do just that. It's an all-inclusive package built and tested as a complete system, meaning you won't have to guess which parts work best together for your classic Mustang. This kit aims to give you a sporty, comfortable ride with significantly improved steering response and control, all while reducing body roll.

At the core of this system are geometry-corrected upper tubular A-arms and lower control arms, featuring corrected ball joint angles that are essential for achieving a lowered ride height without compromising alignment. The included adjustable strut rods further enhance stability and driver control by increasing positive caster and utilizing spherical Heim joints. For ride height and spring rate, you get front coil springs rated at 700 lbs/in, designed to lower the front by 0.5 inches, and heavy-duty multi-leaf rear springs at 180 lbs/in, lowering the rear by 1.5 inches. The kit also includes a substantial 32mm (1.25 in.) tubular steel front sway bar and a 22mm (0.875 in.) 3-way adjustable DOM tubular steel rear sway bar, allowing you to fine-tune your suspension for street or track performance. Complementing these are Fox 1.5 Street Performance Series shocks, specifically tuned for the '64-'66 Mustang to provide a smooth ride and exceptional control.

To tie it all together and reduce chassis flex, subframe connectors are included. While these require a few minutes of welding for installation, the rest of the kit is a direct bolt-on, meaning no permanent modifications to your vehicle are necessary. The kit comes with a comprehensive set of premium mounting hardware, including adjustable tie rod sleeves, laser-cut steel axle mounts and frame rail mounts, polyurethane bushings, Grade 8 bolts, and TIG-welded steel dogbone end links with polyurethane bushings. This kit is specifically designed for rear ends with 2.8-inch outer diameter axle tubes.