Specifications
- Brand
- ICON
- Part #
- K53369
ICON 2024 Toyota Land Cruiser 250 Series, 1.25-3" Lift, Stage 9 Suspension System, CDCV, Billet
$8974.02
Order now to reserve yours — we'll ship as soon as stock arrives. Full refund if we're unable to fulfill.
ICON Stage 9 suspension system for 2024 Toyota Land Cruiser. Improves on- and off-road capability with adjustable damping and increased wheel travel.
Key Features
- Fits 2024 Toyota Land Cruiser.
- Billet aluminum upper control arms improve front-end geometry and allow for on-vehicle camber and caster adjustment.
- ICON Delta Joint PRO replaces the OE ball joint for full suspension travel and eliminates bind.
- Dual-rate rear coil springs provide a comfortable ride height spring rate and a firmer overload rate for improved bottoming resistance and off-road performance, with 2" of rear lift.
- Billet aluminum adjustable rear track bar re-centers the rear axle and allows for on-vehicle adjustment.
- Billet rear upper and lower links feature on-vehicle adjustability and a combination of free articulation and vibration damping.
⚠️ CA WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Learn more
Fits this vehicle
- Toyota Land Cruiser 2024
Product Details
Starting with the ICON billet aluminum upper control arm kit, this Stage 9 suspension system is built to improve your 2024 Toyota Land Cruiser's performance. It corrects front-end geometry, allows for more on-vehicle camber and caster adjustment, and gives you better clearance for suspension components. The system replaces the stock ball joint with the serviceable and rebuildable ICON Delta Joint PRO, which lets the front suspension move through its full travel without binding.
The rear suspension uses a dual-rate coil spring design. This means you get a softer spring rate for a comfortable ride height, combined with a stronger overload spring rate. This setup offers good comfort on the road, resists bottoming out, and performs well off-road. The rear lift is 2 inches over stock, creating a level stance. An adjustable billet aluminum rear track bar helps keep the rear axle centered, and its double adjuster rod ends make it easy to fine-tune the track bar length while it's installed on the vehicle.
ICON's billet rear upper and lower links are also adjustable on the vehicle using the ICON double adjuster. They use greaseless bushings at one end for free articulation and FK rod ends at the other to isolate road noise and vibrations. The rear shocks are ICON 2.5 Aluminum Series CDCV remote reservoir units with integrated bump zones. These shocks improve damping and are valved specifically for the Land Cruiser to balance the truck's performance front to rear. The remote reservoirs increase shock oil volume and heat dissipation, helping to prevent overheating and fade during hard use. The included CDCV valves offer 10 levels of external compression damping adjustment, allowing you to dial in the ride from soft to firm. Front differential drop brackets and specifically designed coilover lengths maximize front suspension travel and prevent CV binding, while polyurethane differential mounting bushings limit movement under load.
Specifications
- Brand
- ICON
- Manufacturer Part #
- K53369
Frequently Asked Questions
You Might Also Like
Similar products from the same category
ICON 12-15 Toyota Hilux 0-3in Stage 3 Suspension System w/Billet Uca
ICON 2015+ Ford F-150 4WD 0-2.63in Stage 1 Suspension System
ICON 2022+ Toyota Tundra 1.25-3.5in Stage 5 Suspension System (BILLET)
ICON 2022+ Toyota Tundra 2-3.5in Stage 5 3.0 Suspension System (TUBULAR)
ICON 2024 Toyota Land Cruiser 250 Series, 1.25-3" Lift, Stage 9 Suspension System, CDCV, Billet
