Specifications
- Brand
- Moog
- Part #
- K500200
- UPC
- 080066028408
- Package Length
- 5.3 in
- Package Width
- 3.3 in
- Package Height
- 2.6 in
- Package Weight
- 0.98 lb
- Interchange Part Numbers
- ACDelco 45D10006, Beck/Arnley 101-7714, Mevotech Supreme MS80503, Dorman - Premium BJ72095PR, NAPA Chassis Parts 2601834, Dorman - OE Solutions 539-897, Raybestos Brakes 5051509, Subaru 20206XA001, Delphi TC5375, Subaru 20206XA000, Centric Parts 610.47005, ETS K500200
MOOG 19-21 Subaru Ascent Front Lower Ball Joint
$64.97
Fits 2006-2021 Subaru B9 Tribeca, Tribeca, and Ascent. MOOG front lower ball joint for reliable steering performance.
Key Features
- Fits 2006-2021 Subaru B9 Tribeca, 2008-2014 Subaru Tribeca, and 2019-2021 Subaru Ascent.
- MOOG problem-solving gusher bearing design allows grease to flow through the metal-to-metal surface for reduced friction and longer life.
- Patented pressed-in cover plate helps seal out debris and minimize looseness, reducing bearing wear.
- Heat-treated ball studs meet or exceed original equipment requirements to prevent premature failure.
- Belleville preload washer helps keep the bearing package tight as bearings wear.
- Precision tolerances allow for easy installation and proper steering alignment.
- Subaru Ascent 2019-2021
- Subaru B9 Tribeca 2006-2007
- Subaru Tribeca 2008-2014
Product Details
MOOG is known for making parts that solve common problems on vehicles, and this front lower ball joint is a good example. If you're working on a 2006-2021 Subaru B9 Tribeca, Tribeca, or Ascent, this part is designed to restore that like-new steering feel by replacing a worn-out original. A ball joint connects your control arm to the steering knuckle, allowing your wheels to pivot for steering while also handling suspension movement.
This MOOG ball joint uses a problem-solving gusher bearing design. That means it has a metal-to-metal setup where grease can actually flow through the bearing surface. This helps reduce friction and keeps things moving smoothly for a longer life. The ball stud itself is heat-treated to meet or beat factory specs, which helps prevent it from failing too early. Plus, there's a special washer that helps keep everything tight as the bearings naturally wear over time, maintaining a solid connection.
You'll find that these ball joints are made with precision tolerances, which means they should fit right and make installation easier, helping to get your steering alignment correct. This is a well-built part that's designed to get your Subaru steering straight and true again.
Specifications
- Brand
- Moog
- Manufacturer Part #
- K500200
- UPC
- 080066028408
- Package Length
- 5.3 in
- Package Width
- 3.3 in
- Package Height
- 2.6 in
- Package Weight
- 0.98 lb
- Interchange Part Numbers
- ACDelco 45D10006, Beck/Arnley 101-7714, Mevotech Supreme MS80503, Dorman - Premium BJ72095PR, NAPA Chassis Parts 2601834, Dorman - OE Solutions 539-897, Raybestos Brakes 5051509, Subaru 20206XA001, Delphi TC5375, Subaru 20206XA000, Centric Parts 610.47005, ETS K500200
Frequently Asked Questions
You Might Also Like
Similar products from the same category
MOOG 19-21 Subaru Ascent Front Lower Ball Joint