How often should I grease this ball joint?

The manufacturer recommends greasing the socket to reduce corrosion and wear. It's best to refer to the Moog installation instructions for the specific interval, but typically, greasing during regular maintenance or oil changes is a good practice.

Does this ball joint come with a dust boot?

Yes, this Moog ball joint comes with a pre-installed dust boot. This boot is important for shielding the internal socket components from dirt, water, and other debris that can cause premature wear.

What makes the 'Gusher Bearing' design beneficial?

The Gusher Bearing design is a metal-to-metal bearing that allows grease to flow through the bearing surface. This continuous lubrication helps reduce friction and wear, contributing to a longer service life for the ball joint.

1992-2002 Ford E-150 Econoline Ball Joint

Name: MOOG 92-02 Ford E-150 Econoline Front Lower Ball Joint
Brand: Moog
SKU: moog-moog-92-02-ford-e-150-econoline-front-lower-ball-joint-t14-641208
Price: 33.40 USD
Availability: InStock

MOOG 92-02 Ford E-150 Econoline Front Lower Ball Joint

$33.40

Only 1 left in stock

Fits 1992-2002 Ford E-150 Econoline. This Moog front lower ball joint is built with a gusher bearing for reduced friction and long life.

Key Features

Fits 1992-2002 Ford E-150 Econoline Club Wagon, 2003-2004 Ford E-150 Club Wagon, 1992-2002 Ford E-150 Econoline, and 2003-2004 Ford E-150.
Features a Problem Solver Gusher Bearing with a metal-to-metal design that allows grease to flow through the bearing surface for reduced friction and extended life.
Ball studs are heat treated to match or exceed OE requirements, improving fatigue strength and inhibiting premature failure.
Precision tolerances allow for easy installation and proper steering alignment.
A pre-installed dust boot shields socket components from contaminants that cause wear.
Includes a Belleville preload washer to keep the bearing package tight as bearings wear.

Secure CheckoutFast Shipping631-982-0042

Will this fit your vehicle?

Product Details

If you're working on the front suspension of your 1992-2002 Ford E-150 Econoline, this Moog K8611T front lower ball joint is a solid option. Ball joints are crucial for connecting your control arms to the steering knuckles, allowing your wheels to pivot for steering while also holding the suspension together. When they wear out, you can experience clunking noises, loose steering, and uneven tire wear.

Moog builds these ball joints with a gusher bearing design. This means the bearing surface is metal-to-metal, and it allows grease to flow through it. This design helps reduce friction and wear, especially when you regularly grease the fitting. The ball stud itself is heat-treated to meet or exceed original equipment requirements, which helps prevent premature failure and improves its resistance to fatigue. Plus, a pre-installed dust boot keeps dirt and water out, protecting the internal components from damage. The Belleville preload washer helps keep the bearing package tight as the joint wears, and the socket is greaseable so you can flush out contaminants with fresh lubricant.

This ball joint is designed for a direct fit, meaning it should install without issue and align properly. Remember to refer to the manufacturer's installation instructions for specific details on greasing and torque specifications.