What fabrication is required for this sway bar kit?

This kit requires welding to install. You will need to weld the provided tabs to your axle tubes and weld the universal DOM tube into place. The threaded rods for the links can also be cut to your desired length.

What is the purpose of the Antirock sway bar system?

The Antirock sway bar system is designed to allow for greater suspension articulation off-road. It works by allowing the front and rear suspension to move more independently of each other, which is beneficial for crawling over obstacles.

Does this kit come with everything needed for installation?

The kit includes the sway bar, arms, bushings, rod ends, jam nuts, and axle tabs. However, it does not include the tools or consumables for welding, nor does it specify the exact length for the DOM tube or vertical links, as these must be determined by your custom build.

Specifications

Brand: RockJock
Part #: CE-9907-20
UPC: 810038154169

RockJock Antirock Sway Bar Kit Universal 40in Bar 20in Steel Arms

Name: RockJock Antirock Sway Bar Kit Universal 40in Bar 20in Steel Arms
Brand: RockJock
SKU: rockjock-rockjock-antirock-sway-bar-kit-universal-40in-bar-20in-steel-arms-t14-565843
Price: 651.26 USD
Availability: BackOrder

$651.26

On Backorder

Order now to reserve yours — we'll ship as soon as stock arrives. Full refund if we're unable to fulfill.

RockJock Antirock Sway Bar Kit Universal 40in Bar 20in Steel Arms. This universal kit requires fabrication for custom builds.

Key Features

This kit includes a 39.5 inch long, 1 inch diameter torsion bar and a 1.75 inch x .095 wall DOM tube for mounting.
It comes with 20 inch long fabricated steel arms and 14 inch long threaded rods for vertical links.
All necessary 1/2 inch x 20 thread heim joint rod ends, jam nuts, and axle tabs for welding are supplied.
Delrin bushings are included to support the torsion bar within the DOM tube.
This is a universal fit kit designed for custom fabrication and welding.
The vertical link rods can be cut to your desired length for custom tuning.

This is a universal sway bar kit that requires fabrication and welding for installation. It is not a direct bolt-on part and is intended for custom builds.

⚠️ CA WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Learn more

Secure CheckoutFast Shipping631-982-0042

About this part

Product Details

This RockJock Antirock sway bar kit comes with a 39 1/2 inch long, 1 inch diameter torsion bar and a universal weld-in 1.75 inch x .095 wall DOM tube that you'll cut to length. You also get 20 inch long fabricated steel arms, 14 inch long threaded rods for the vertical links (which you can cut to your preferred length), and all the necessary 1/2 inch x 20 thread heim joint rod ends, jam nuts, and tabs to weld onto your axle tube. Delrin bushings to support the bar within the DOM tube are also included.

This is a universal kit designed for custom builds, like rock buggies or rigs where you're fabricating the suspension from the ground up. Because it's a universal setup, it requires welding and fabrication for installation; it's not a direct bolt-on part. The steel arms are well-built for the stresses of off-road articulation, and the included threaded rods for the links allow you to fine-tune the sway bar's effective length and geometry to your specific setup.

Since this kit involves welding and custom fabrication, it's best suited for experienced builders or those comfortable with custom suspension work. You'll need to determine the optimal placement and mounting points for the weld-in tube and axle tabs based on your vehicle's design and intended use. This setup is intended to improve suspension articulation off-road by allowing the wheels to move more independently compared to a traditional, stiffer sway bar setup.