RockJock Antirock Sway Bar Kit Universal 40in x 1in Bar 17in Steel Arms

This is the RockJock Antirock sway bar kit, designed for builders creating custom off-road rigs and rock buggies. It's a universal kit that gives you the components to build a sway bar system that can significantly improve your suspension's articulation when you're tackling tough terrain. The Antirock system works by allowing the front and rear suspension to move more independently, which is crucial for keeping your tires on the ground over uneven surfaces.

This kit includes a 1-inch diameter, 39.5-inch long torsion bar made from steel, paired with 17-inch long fabricated steel arms. You also get 14-inch long vertical links with 1/2-inch RH/LH threaded rods that you can cut to your specific needs, along with the necessary heim joint rod ends and jam nuts. To mount the sway bar, the kit provides a universal weld-in DOM tube measuring 1.75 inches in diameter with a 0.095-inch wall thickness, which you'll cut to length. Delrin bushings are included to support the bar within this tube. Keep in mind that this kit requires fabrication and welding for installation; it's not a direct bolt-on solution.

Because this is a universal kit, it's intended for custom builds where you have the flexibility to determine the exact placement and mounting points. The included components are well-made and designed to handle the stresses of off-road use, giving you a solid foundation for your custom suspension setup. You'll need to weld the mounting tabs to your axle tubes and the DOM tube for the sway bar itself.