RockJock Johnny Joint Rod End 2in Narrow Forged 1.800in X .625in Ball 3/4in-16 RH Thread Shank

If you're building a custom suspension system or fabricating your own control arms, the RockJock Johnny Joint rod end is a solid choice. This narrow forged joint is designed for fabricators who need a wide range of motion. Unlike a standard heim joint, which typically offers about 22 degrees of movement, the Johnny Joint can move up to 40 degrees in any direction. This flexibility is key for allowing your suspension to articulate smoothly over rough terrain or during aggressive articulation.

The inner ball is encased in a high-density urethane bushing, which provides a level of cushioning that a heim joint can't match. This urethane also helps to dampen vibrations. The heat-treated center ball is cross-drilled, allowing for lubrication to reach the entire surface through the included zerk fitting. The joint is held together with two heavy-duty, heat-treated washers and a snap ring for security. This particular joint has a 2-inch diameter, a 1.800-inch mounting width on the ball, and a 0.625-inch thru-bolt hole, with 2.25 inches of 3/4-inch-16 right-hand thread on the shank. It's finished in a gold zinc plating for corrosion resistance.