RockJock Johnny Joint Rod End 2in Narrow Weld-On Weld-On 1.800in X .630in Ball Ext. Greased

If you're building a custom suspension system, especially for off-road use where maximum articulation is key, a weld-on Johnny Joint rod end like this one from RockJock is a solid choice. These joints are designed to give you a lot more freedom of movement than a standard heim joint, allowing your suspension to flex much further without binding. This particular joint is a narrow 2-inch outer diameter body, built to weld onto your suspension arms or links.

What sets the Johnny Joint apart is its design. Instead of just a metal-on-metal ball and socket, it uses a high-density urethane bushing around the heat-treated center ball. This bushing not only allows for a generous 40 degrees of movement in any direction – significantly more than a typical heim joint's 22 degrees – but it also provides a bit of cushioning. The center ball is cross-drilled for lubrication, and you can easily grease it through the zerk fitting on the outside. It's held together with heavy-duty washers and a snap ring, all housed within a weldable DOM tubing shell.

This specific joint has a 1.800-inch mounting width and a 0.630-inch hole for the thru-bolt, making it suitable for a wide range of custom fabrication projects. It's a well-built component that fabricators trust when they need their suspension to move freely and reliably.