Skunk2 Pro Series 2 Honda S2000 F20C/F22C Camshafts

Skunk2 Racing is well-known for their performance parts, especially for Honda vehicles. This Pro Series 2 camshaft set is specifically made for the Honda S2000's F20C and F22C engines. If you're looking to get more power out of your S2000, especially if you've already upgraded your intake and exhaust, these camshafts are designed to help you reach that goal. They're built to optimize horsepower and torque across the entire powerband, from about 1500 RPM all the way up to 9100 RPM.

These camshafts are the result of years of racing experience. They use high-strength, hollow iron-alloy cores with advanced profiles that are ground to exact specifications on state-of-the-art CNC machines. You'll find hardened, wear-resistant lobes and surfaces on each camshaft. The Pro Series 2 camshafts are designed to give you a notable increase in horsepower, typically between 12-15 HP, and torque gains of 15-18 ft-lbs. Importantly, they are engineered to maintain your factory idle quality and low-speed emissions, which is a big plus for a performance camshaft.

When installing these, keep in mind the specific valve clearances: .008 inches for intake and .010 inches for exhaust. The intake and exhaust duration are both 276 degrees, with a lift of 13.70mm for intake and 12.70mm for exhaust. The intake centerline is set at 105 degrees and the exhaust at 106 degrees. Please note that these camshafts are not CARB approved and cannot be shipped to California.