SPC Performance 0 deg. FORD CAM/CAS SLV

If you're working on a Ford with a twin traction beam Dana 44 axle, like your 1980-1998 F-250, you might need to fine-tune your alignment. This 0-degree camber and caster sleeve from SPC Performance is designed to help you do just that. It's a straightforward way to make precise adjustments to your front-end alignment without needing to replace major suspension components.

The beauty of these sleeves is their simplicity. You remove the upper ball joint stud nut and break the taper free, then use a sleeve puller to swap out the old sleeve for this new 0-degree one. This allows you to establish the baseline for your alignment needs. For a split adjustment between camber and caster, you can simply rotate the sleeve by 45 degrees. The clear zinc coating helps resist corrosion, keeping the part functional and looking good for longer.

This particular sleeve is a 0-degree option, meaning it provides a neutral starting point. You'll need one sleeve per wheel, and SPC recommends a sleeve puller tool for installation. It's a well-built piece that makes a common alignment task much more manageable.