How does this control arm help with a lowered car?

When you lower a Scion tC, the rear suspension often ends up with too much negative camber. The factory adjustment isn't enough to fix this. This SPC Performance control arm adds a fixed +2 degrees of positive camber, giving you the extra range needed to properly align the rear wheels using the stock cam bolt.

What is the benefit of the rubber-bonded bushings?

The rubber-bonded bushings are designed to absorb road vibrations and noise. This helps to maintain a comfortable ride quality, similar to the original factory setup, even with the modified control arm.

Do I need to buy anything else to install this?

This control arm is designed to work with your vehicle's existing OEM cam bolt for adjustment. You will need one control arm for each rear wheel to achieve the desired alignment correction.

2005-2010 Scion tC Rear Control Arm | SPC Performance

Name: SPC Performance 05-10 Scion tC Rear Control Arm
Brand: SPC Performance
Price: 114.36 USD
Availability: InStock

SPC Performance 05-10 Scion tC Rear Control Arm

$114.36

Only 4 left in stock

Fits 2005-2010 Scion tC. SPC Performance rear control arm. Corrects negative camber on lowered vehicles.

Key Features

Fits 2005-2010 Scion tC.
Adds a fixed +2 degrees of positive camber to the rear suspension.
Corrects excessive negative camber issues common on lowered vehicles.
High-strength steel construction for durability.
Rubber-bonded bushings help retain factory ride quality.
Works with the OEM cam bolt for fine-tuning alignment.

⚠️ CA WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Learn more

Secure CheckoutFast Shipping631-982-0042

Fits this vehicle

Scion tC 2005-2010

Product Details

If you've lowered your 2005-2010 Scion tC and are dealing with too much negative camber, this rear control arm from SPC Performance is what you need. The factory cam bolt adjustment isn't enough to bring the rear wheels back into alignment when the car is sitting lower, often resulting in excessive tire wear on the inside edge. This part is designed to give you the extra adjustment range you need.

SPC Performance builds this control arm from high-strength steel and includes rubber-bonded bushings. These bushings help maintain a comfortable ride quality, similar to what you'd expect from the factory setup. The arm itself is designed to add a fixed +2 degrees of positive camber change to the rear suspension. This added range works in conjunction with your car's original cam bolt, allowing you to dial in the proper alignment for your lowered vehicle and get your tire wear back to normal.

You'll need one of these control arms for each rear wheel to get the full benefit. It's a straightforward way to fix alignment issues that come up after lowering your tC.