Specifications
- Brand
- SPC Performance
- Part #
- 23004
- UPC
- 082642230045
SPC Performance 1/2 deg. 4X4 BUSHING
$23.31
SPC Performance 1/2 deg. 4X4 BushingAdjusts camber and caster by 0.50 degrees on many older trucks and SUVs with Dana 44 or GM 10 bolt axles.
Key Features
- Fits many older model trucks and SUVs with Dana 44 or GM 10 bolt axles.
- Allows for a ±0.50° adjustment in camber and caster.
- Requires one bushing per wheel for adjustment.
- Installation involves replacing the existing upper ball joint sleeve.
- SPC recommends using their 4169 spanner socket for installation.
⚠️ CA WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Learn more
Product Details
When you're trying to dial in the alignment on an older truck or SUV, sometimes you need just a little bit of adjustment to get things perfect. This SPC Performance bushing is designed to give you that extra bit of control, specifically for vehicles equipped with Dana 44 or GM 10-bolt front axles. It's a well-built sleeve that allows you to make a 0.50-degree change to either your camber or caster angle, which can make a big difference in how your vehicle handles and how your tires wear.
Installation involves removing the upper ball joint stud nut and replacing the existing sleeve with this adjustable one. You'll then rotate the sleeve to fine-tune your alignment settings. Keep in mind that you'll need one of these bushings per wheel, and SPC recommends their 4169 spanner socket for easier sleeve removal. This part is a popular choice for getting those classic 4x4s and older pickups back to their proper alignment specifications.
Specifications
- Brand
- SPC Performance
- Manufacturer Part #
- 23004
- UPC
- 082642230045
Frequently Asked Questions
You Might Also Like
Similar products from the same category
SPC Performance 1/2 deg. 4X4 BUSHING