Specifications
- Brand
- SPC Performance
- Part #
- 23212
- UPC
- 082642232124
SPC Performance 2-1/2 deg. FORD SLEEVE
$27.19
Fits 2005-2025 Ford F-250 Super Duty. SPC Performance alignment sleeve easily changes camber and caster by up to 2.50 degrees.
Key Features
- Fits 2005-2025 Ford F-250 Super Duty, 2005-2025 Ford F-350 Super Duty, and 2005-2015 Ford F-450 Super Duty.
- Easily changes front-end camber and/or caster settings.
- Provides an adjustment range of ±2.50 degrees for camber and caster.
- Designed for Ford heavy-duty trucks with the updated 2005 axle design.
- One sleeve is required per wheel for adjustment.
⚠️ CA WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Learn more
Fits these vehicles
- Ford F-250 Super Duty 2005-2025
- Ford F-350 Super Duty 2005-2025
- Ford F-450 Super Duty 2005-2015
Product Details
If you're adjusting the front suspension on your 2005-2025 Ford F-250 or F-350 Super Duty, you might need to fine-tune the camber and caster. Ford changed the axle design in 2005 on these trucks, and sometimes the factory alignment specs are just a little off, especially after modifications or wear. This sleeve from SPC Performance is designed to help you dial in that front-end alignment.
This particular sleeve allows for an adjustment range of up to 2.50 degrees for both camber and caster, and you can change both at the same time. It's a well-built piece that fits right into the factory location on your heavy-duty Ford. You'll need one sleeve per wheel to make the adjustment.
For determining the exact amount of adjustment needed, SPC recommends using their 23229 zero-degree sleeve first. This helps you figure out precisely how much change you need before installing the correct degree sleeve.
Specifications
- Brand
- SPC Performance
- Manufacturer Part #
- 23212
- UPC
- 082642232124
Frequently Asked Questions
You Might Also Like
Similar products from the same category
SPC Performance 2-1/2 deg. FORD SLEEVE