SPC Performance 2 deg. FORD CAM/CAS SLV

When you're working on the front end of your 1980-1998 Ford F-250, especially those with the twin traction beam DANA 44 axles, getting the alignment just right can be tricky. This SPC Performance sleeve is designed to help you easily adjust your camber and caster settings by up to 2 degrees. It's a straightforward way to correct alignment issues after suspension work or to fine-tune your vehicle's handling.

The process involves removing the wheel, cotter pin, and upper ball joint stud nut. You'll then break the taper free and use a sleeve puller to remove the old sleeve. By installing a zero-degree sleeve first, you can determine the exact adjustment needed before putting in this 2-degree sleeve. For a split adjustment between camber and caster, simply rotate the sleeve 45 degrees. This sleeve comes with a clear zinc coating to help resist corrosion, keeping it working well for longer.

You'll need a sleeve puller tool (like SPC's 77880) to get this installed. Remember, one sleeve is required for each wheel where you need to make an adjustment.