SPC Performance Jeep 1/4 Deg. Camber Sleeve

Fix front camber issues on your Jeep Wrangler (JL) by replacing the camber sleeve that links the upper ball joint to knuckle. Simple determine what degree offset sleeve is already in the knuckle and replace it with a new offset. Jeeps coming off the line right now have +1/4deg sleeves on both sides. This +1/4deg sleeve will only change your camber if you have a sleeve with a different offset. SPC's camber sleeves feature our hex chromate free finish certified to a 700 hour salt spray test. Do you align a lot of Jeeps or are you not sure how much change you will need? Consider SPC's 6 piece set which includes one of each sleeve available ranging from 0deg to +1.25deg. P/N 23400 California Residents WARNINGThis sleeve will easily change Camber +0.25°on Jeep Wrangler (JL) models by replacing the camber sleeve that links the upper ball joint to the knuckle. Use the (23409) zero-degree sleeve to determine the amount of change needed and install the correct degree sleeve. Newly assembled Jeeps feature +1/4° (+0.25°) sleeves on both sides from the factory. All camber sleeves in this series feature a hex-chromate-free finish certified to a 700-hour salt spray test. Consider the (23400) (6) piece set, which includes one of each sleeve available ranging from 0° to +1.25° to ensure complete coverage.

Description

• 1/4deg CAMBER JEEP SLEEVE
• 1/4 CAMBER JEEP SLEEVE