SPC Performance Jeep 3/4 Deg. Camber Sleeve

SPC Performance is known for making suspension parts that help you dial in your alignment. If you're working on the front end of your 2018-2025 Jeep Wrangler, you might run into camber issues. This specific camber sleeve is designed to replace the stock one that connects the upper ball joint to the knuckle, allowing you to easily adjust your front camber.

This sleeve will change your camber by +0.75 degrees, which is helpful if you've noticed your Jeep pulling or if you're trying to get your alignment perfect after a modification. Factory Jeeps often come with +1/4 degree sleeves, so this part gives you a significant adjustment. The finish on these sleeves is hex-chromate-free and has been tested to withstand 700 hours of salt spray, meaning it's built to resist corrosion.

If you're not sure exactly how much adjustment you'll need, or if you work on a lot of Jeeps, you might consider SPC's 6-piece set which includes sleeves ranging from 0 to 1.25 degrees. For this particular sleeve, you'll need one per wheel to make the adjustment.