SPC Performance JEEP JK CAMS (2)

If you're adjusting the suspension on your Jeep Wrangler JK, especially after a lift, getting the caster and pinion angles dialed in is crucial for proper alignment and handling. These cam bolts from SPC Performance are designed to replace your front axle bolts, giving you the ability to make those important adjustments. They allow for up to a 3-degree total change in both caster and pinion angle, which can make a big difference in how your Jeep drives after modifications.

What's neat about these is how they work. By replacing the stock bolts, you can rotate them to change the angle of the axle. This is especially helpful for correcting caster when you've lifted your Jeep. Keep in mind that changing the pinion angle will also affect your caster, so it's a bit of a balancing act. For even more adjustment range, SPC offers offset pin joints that can be used in conjunction with these cams to fine-tune your camber and caster settings even further.

To get the most out of these cam bolts, you might need to slightly elongate the OEM bolt holes. SPC recommends using their knockout punch (#74910) for this. If you're looking to achieve a more precise alignment after suspension work, these SPC Performance cam bolts are a solid option to consider.