Can I use these endlinks on both the front and rear of my Miata?

Yes, these endlinks can be applied to either the front or rear suspension. If you need to replace both the front and rear endlinks, you will need to purchase two kits.

What makes these endlinks suitable for aftermarket sway bars?

These endlinks feature large, Teflon-lined FK 1/2" bearings for high load capacity and custom heat-treated Chromoly studs with extreme articulation capability. This design prevents binding and handles the increased stress from stiffer aftermarket sway bars.

What does it mean that the endlinks are adjustable?

The adjustable length allows you to precisely set the endlink to eliminate any preload on the sway bar. This is important to prevent issues that can arise from uneven suspension heights or corner weighting.

2006-2015 Mazda MX-5 Miata Sway Bar Endlinks

Name: SPL Parts 06-15 Mazda Miata (NC) Front/Rear Swaybar Endlinks
Brand: SPL Parts
Price: 249.15 USD
Availability: InStock

SPL Parts 06-15 Mazda Miata (NC) Front/Rear Swaybar Endlinks

$249.15

Only 1 left in stock

Fits 2006-2015 Mazda MX-5 Miata. These adjustable sway bar endlinks use large bearings and high-articulation studs to work with stiffer aftermarket sway bars.

Key Features

Fits 2006-2015 Mazda MX-5 Miata and 2004-2011 Mazda RX-8.
Includes a pair of adjustable sway bar endlinks, usable on the front or rear.
Features large, Teflon-lined FK 1/2" bearings for high load capacity.
Custom heat-treated Chromoly studs offer extreme articulation capability (65 degrees).
Adjustable length allows for eliminating preload on the sway bar.
Proudly made, engineered, and assembled in the USA.

Secure CheckoutFast Shipping631-982-0042

Fits these vehicles

Mazda MX-5 Miata 2006-2015
Mazda RX-8 2004-2011

Product Details

When you're upgrading your suspension on your 2006-2015 Mazda MX-5 Miata, you'll want to make sure your sway bar endlinks can keep up. This kit from SPL Parts includes a pair of adjustable sway bar endlinks, designed to handle the demands of stiffer aftermarket sway bars. They are built in the USA and can be used on either the front or rear of your Miata. If you need them for both ends, you'll need to purchase two kits.

These endlinks feature substantial Teflon-lined FK 1/2" bearings, which offer a high load capacity, essential when you're running a more aggressive sway bar. The custom heat-treated Chromoly studs are designed for extreme articulation, allowing up to 65 degrees of movement. This capability is crucial for preventing binding, especially when you're using different adjustment holes on aftermarket sway bars. The adjustable design also lets you set the length precisely to eliminate any preload on the sway bar, which can happen from uneven spring settling or corner balancing.