SPL Parts 2016+ Chevrolet Camaro (Gen 6) Front Tie Rod Ends (Bumpsteer Adjustable)

The 4140 Chromoly shanks on these SPL Parts front tie rod ends are heat-treated to handle the stress of racing and drifting. These are designed specifically for the 6th Gen Chevrolet Camaro, allowing you to relocate the tie rod end pivot point. This adjustment is key to correcting bump steer that can arise from changes to your caster or lower arm geometry, which can help reduce lap times. They also keep the tie rod end from binding on significantly lowered cars, preventing the inner tie rods from bending or breaking.

You'll find stainless steel spacers included for precise bump steer adjustment, along with 2024-T351 aluminum alloy turnbuckles that offer lightweight strength. The FK Rod Ends themselves are Teflon-lined and offer 19 degrees of articulation, which helps prevent binding even on lowered vehicles. These are made to work with 19-inch and 20-inch wheels, though 18-inch wheels might require trimming the stud to avoid contact with the wheel barrel.

These tie rod ends are sold as a pair and are proudly made in the USA. They are designed to work with 19-inch and 20-inch wheels, but if you're running 18-inch wheels, you may need to trim the stud to prevent contact with the wheel barrel.