Style Guard Black & Chrome Side Molding (5/8" x 7ft.)

The Style Guard Universal Fine Line Side Molding By Cowles Products is the best way to add styling and protection to your vehicle. Easy to apply with durable and long lasting professional grade 3M adhesive backing. You can apply the moldings all by yourself with four very simple and easy steps. The Style Guard Side Molding can be applied to most model vehicles by cutting and trimming the molding to a specific length of your vehicle. Give your vehicle that stylish look you've been searching for with the Style Guard Universal Fine Line Side Molding. Available in black/chrome. Comes as a set of 2.

Features:

• Add Style and Protection
• Easy To Apply
• Professional Grade 3M Adhesive
• Tested Tough
• Molding Size: 5/8" x 7'

Easy To Apply In 4 Simple Steps:

STEP 1:	STEP 2:	STEP 3:	STEP 4:

STEP 1: Clean the surface area very well to remove all road film, wax or other material that may prevent a film bond.
Allow to dry before applying.

STEP 2: With a tape measure and masking tape, lay down a straight line of masking tape the entire length of the vehicle.
The bottom edge of the tape should be where you want the upper edge of the molding.

STEP 3: You will want a 1/8" gap at each door edge. Starting at the front of your vehicle,
measure the section of molding you will need to reach that gap. Use pruning shears
or a sharp knife to bevel-cut the molding at a 45 degree angle.

STEP 4: Press the molding along the bottom edge of your tape line.
Refer to step 3 and 4 as you do each section. Do not wash vehicle for 24 hours.