What is the primary function of a wastegate?

A wastegate controls the maximum boost pressure produced by a turbocharger. It does this by diverting exhaust gases away from the turbine wheel when a set pressure is reached, preventing over-boosting and potential engine damage.

What does the .43 Bar spring setting mean?

The .43 Bar spring (approximately 6.24 PSI) is the base boost pressure this wastegate will target. It's the minimum boost level the wastegate will allow before it starts to open and bypass exhaust gas. Higher boost levels would require a different spring or external boost control.

What is required for installation?

Installation typically involves plumbing the wastegate into the exhaust manifold and connecting it to a boost controller or the turbo's compressor outlet. Proper sealing and routing of exhaust gases are critical for effective operation. It's recommended to consult installation guides or a professional for proper setup.

TiAL Sport V50 50mm Wastegate .43 Bar Black 005011

Name: TiAL Sport V50 Wastegate 50mm .43 Bar (6.24 PSI) - Black
Brand: TiALSport
SKU: tialsport-tial-sport-v50-wastegate-50mm-43-bar-6-24-psi-black-t14-538246
Price: 587.99 USD
Availability: BackOrder

TiAL Sport V50 Wastegate 50mm .43 Bar (6.24 PSI) - Black

$587.99

On Backorder

Order now to reserve yours — we'll ship as soon as stock arrives. Full refund if we're unable to fulfill.

TiAL Sport V50 Wastegate 50mm .43 Bar (6.24 PSI) - Black

Key Features

This is the TiAL Sport V50 50mm wastegate, set to control boost pressure at .43 Bar (6.24 PSI).
It features a robust construction that can handle high temperatures and pressures.
The V50 wastegate uses an internal diaphragm and spring system to regulate exhaust gas flow.
This model comes pre-set with a .43 Bar spring for moderate boost levels.
The black anodized finish adds corrosion resistance.
Not CARB approved and cannot be shipped to California.

Secure CheckoutFast Shipping631-982-0042

Product Details

This is the TiAL Sport V50 50mm wastegate, set to control boost pressure at .43 Bar (6.24 PSI). It's a well-built component designed for turbocharged vehicles where precise boost management is critical. The V50 is a popular choice for those looking to upgrade their forced induction system and gain more control over engine performance. It features a robust construction that can handle the high temperatures and pressures found in a performance exhaust manifold environment.

The V50 wastegate uses a unique internal diaphragm and spring system to regulate exhaust gas flow around the turbocharger's turbine. By precisely controlling how much exhaust gas bypasses the turbine, it directly influences the boost pressure the turbocharger produces. This particular model comes pre-set with a .43 Bar spring, making it suitable for applications needing moderate boost levels. The black anodized finish not only looks sharp but also adds a layer of corrosion resistance. Installation typically involves plumbing it into your exhaust manifold and boost controller setup, requiring careful attention to ensure a leak-free seal.

This wastegate is sold individually. Please note that this part is not CARB approved and cannot be shipped to California. For optimal performance and longevity, ensure proper installation and consider consulting with a professional tuner to dial in your boost settings.