What is the purpose of a wastegate?

A wastegate controls the maximum boost pressure your turbocharger can produce. It diverts some exhaust gas away from the turbine wheel, preventing it from spinning too fast and creating excessive boost that could damage your engine.

Can I change the boost pressure on this wastegate?

Yes, you can change the boost pressure by swapping the pre-installed .43 Bar spring with other available TiAL Sport wastegate springs. Different springs allow you to set different base boost levels for your application.

What else might I need to install this wastegate?

You will need appropriate plumbing to connect the wastegate's exhaust port to your exhaust system or a dump tube. Additionally, proper boost control via an ECU or manual boost controller is recommended to manage and fine-tune boost levels effectively.

TiAL Sport V50 50mm Wastegate .43 Bar Purple 005012

Name: TiAL Sport V50 Wastegate 50mm .43 Bar (6.24 PSI) - Purple
Brand: TiALSport
SKU: tialsport-tial-sport-v50-wastegate-50mm-43-bar-6-24-psi-purple-t14-538247
Price: 587.99 USD
Availability: BackOrder

TiAL Sport V50 Wastegate 50mm .43 Bar (6.24 PSI) - Purple

$587.99

On Backorder

Order now to reserve yours — we'll ship as soon as stock arrives. Full refund if we're unable to fulfill.

TiAL Sport V50 Wastegate 50mm .43 Bar (6.24 PSI) - Purple

Key Features

This product is the TiAL Sport V50 50mm wastegate in a purple finish.
Includes a pre-installed .43 Bar (6.24 PSI) spring for base boost control.
Comes with the necessary mounting hardware for installation.
Features a 50mm diaphragm and valve for effective exhaust gas management.
Designed for precise boost pressure regulation in forced induction systems.
Not CARB approved and cannot be shipped to California.

Secure CheckoutFast Shipping631-982-0042

Product Details

What you get with this TiAL Sport V50 wastegate is the 50mm wastegate body itself, featuring a distinctive purple finish. It also includes a .43 Bar (6.24 PSI) spring, which is pre-installed, and the necessary mounting hardware to get it attached to your turbo system. This is a well-built component designed to help you manage boost pressure effectively in a forced induction setup.

The V50 wastegate is a popular choice for tuners and builders looking for precise boost control. Its 50mm diaphragm and valve design allows for excellent flow characteristics, which is crucial for preventing overboost and keeping your engine running safely within its intended parameters. The included spring sets the base boost pressure, and you can swap it out with other available springs to fine-tune boost levels for your specific application. The solid construction means it can handle the high temperatures and pressures found in a turbo system.

When installing this wastegate, remember that it's not CARB approved, so it cannot be shipped to California. You'll want to ensure you have the correct plumbing to route the exhaust gases away from the wastegate's exhaust port to a safe location, typically back into the exhaust system or a dump tube. Having a boost controller or ECU tuning capability will allow you to take full advantage of the wastegate's ability to hold boost steady.