What is the purpose of a wastegate?

A wastegate controls the maximum boost pressure your turbocharger can produce. It does this by diverting some exhaust gas away from the turbo's turbine wheel once a set pressure is reached, preventing over-boosting.

What does the .299 Bar spring setting mean?

The .299 Bar spring (approximately 4.34 PSI) determines the base boost pressure the wastegate will aim to maintain. This is the pressure the wastegate actuator will start to open at to relieve excess exhaust pressure.

What else might I need to install this wastegate?

Proper plumbing for the wastegate actuator is essential, typically involving vacuum lines connected to your boost source and the wastegate itself. You'll also need to ensure it's correctly integrated into your exhaust manifold and downpipe setup.

TiALSport V60 Wastegate 60mm .299 Bar Red 002628

Name: TiAL Sport V60 Wastegate 60mm .299 Bar (4.34 PSI) w/Clamps - Red
Brand: TiALSport
SKU: tialsport-tial-sport-v60-wastegate-60mm-299-bar-4-34-psi-w-clamps-red-t14-537877
Price: 612.66 USD
Availability: BackOrder

TiAL Sport V60 Wastegate 60mm .299 Bar (4.34 PSI) w/Clamps - Red

$612.66

On Backorder

Order now to reserve yours — we'll ship as soon as stock arrives. Full refund if we're unable to fulfill.

TiAL Sport V60 60mm wastegate with .299 Bar (4.34 PSI) spring and clamps. Red.

Key Features

This product includes the TiAL Sport V60 60mm wastegate, clamps, and a .299 Bar (4.34 PSI) spring.
The wastegate housing is finished in red.
Features a 60mm diaphragm for high flow capacity.
Designed to regulate turbocharger boost pressure.
Includes necessary clamps for installation.
Not CARB approved; cannot ship to California.

Secure CheckoutFast Shipping631-982-0042

Product Details

This package includes the TiAL Sport V60 60mm wastegate in a striking red finish, complete with the necessary clamps for installation. It also comes pre-set with a .299 Bar (4.34 PSI) spring, ready to help you manage boost pressure in your forced induction system. This wastegate is a well-built component designed to regulate the flow of exhaust gases around the turbine wheel of your turbocharger, ensuring your engine doesn't exceed a safe and optimal boost level.

The V60 is a popular choice for tuners and builders looking for reliable boost control. Its 60mm diaphragm design allows for a large flow capacity, which is crucial for effectively managing boost on higher-powered setups. The robust construction, featuring a high-temperature resistant diaphragm and a precision-machined housing, means it can handle the demanding environment of a turbo system. The included clamps ensure a secure connection to your exhaust manifold and downpipe plumbing, simplifying the initial setup process.

When installing this wastegate, remember that it's a critical part of your turbo system's tuning. Proper plumbing to and from the wastegate actuator is essential for accurate boost control. This unit is not CARB approved and cannot be shipped to California. Always consult your turbo system's manual or a qualified tuner for specific installation and tuning recommendations to get the most out of this component.