How do I adjust the panhard bar?

You can adjust the panhard bar while it's installed on the vehicle. Simply loosen the two jam nuts on the adjuster, make your desired length change, and then retighten the jam nuts to secure the position.

What is the center-to-center length of this panhard bar?

The panhard bar has a standard center-to-center distance of 31-3/8 inches. It is adjustable between 30-7/8 inches and 31-7/8 inches to allow for fine-tuning.

Does this panhard bar come with all necessary hardware for installation?

The panhard bar includes new grease-able polyurethane bushings and the adjuster. It is designed for a direct bolt-on installation with basic tools, but you should refer to the manufacturer's installation instructions for any specific hardware requirements.

UMI Performance 59-64 GM B-Body Adjustable Panhard Bar

Specifications

Brand: UMI Performance
Part #: 3654-R
UPC: 3654-R

UMI Performance 59-64 GM B-Body Adjustable Panhard Bar

Name: UMI Performance 59-64 GM B-Body Adjustable Panhard Bar
Brand: UMI Performance
Price: 174.07 USD
Availability: InStock

$174.07

On Backorder

Order now to reserve yours — we'll ship as soon as stock arrives. Full refund if we're unable to fulfill.

Fits 1959-1964 Chevy Bel Air. UMI Performance adjustable panhard bar centers rear end for improved stability and alignment.

Key Features

Fits 1959-1964 Chevrolet Bel Air, Biscayne, and Impala.
Allows on-car adjustment to center the rear end, improving alignment and tire clearance.
Constructed from 1.000" x 0.156" DOM mild steel tubing.
Features a 4140 heat-treated adjuster for durability.
Includes new, grease-able polyurethane bushings.
Fully TIG welded for a strong, solid build.

⚠️ CA WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Learn more

Secure CheckoutFast Shipping631-982-0042

Fits these vehicles

Chevrolet Bel Air 1959-1964
Chevrolet Biscayne 1959-1964
Chevrolet Impala 1959-1964

Product Details

UMI Performance is known for making well-built suspension and chassis components for classic GM vehicles. This adjustable tubular panhard bar is designed to replace the stock bar on your 1959-1964 Chevrolet Bel Air, Biscayne, or Impala, helping to keep your rear end centered and aligned properly. Getting the rear axle perfectly centered is key for consistent handling and can also give you a little extra clearance if you're running wider tires.

What's really handy about this bar is that you can adjust it right on the car. You just loosen the jam nuts on the heat-treated adjuster, make your change, and tighten them back up. It’s built from strong 1.000" x 0.156" DOM mild steel tubing that’s fully TIG welded for solid construction. It also comes with new grease-able polyurethane bushings, which are a nice upgrade over stock rubber ones. The whole thing gets a durable powder coat finish and installs with basic tools in under 30 minutes, with no modifications needed.

Just a heads-up, this bar is not designed for wagon models, so double-check the length if you have one of those. The center-to-center distance is 31-3/8 inches and can be adjusted between 30-7/8 and 31-7/8 inches.