UMI Performance 59-64 GM B-Body Non-Adjustable Panhard Bar

If you're working on a 1959-1964 Chevrolet Bel Air, Biscayne, or Impala, this UMI Performance Panhard Bar is designed to help you get the rear end perfectly centered. A properly centered rear axle is key to good handling and can even give you a bit more room for wider tires, which is often a goal when restoring or modifying these classic GM B-Body cars. This bar replaces the stock unit and offers a significant improvement in rear-end stability.

What sets this panhard bar apart is its on-car adjustability. You can loosen the jam nuts and make adjustments right there on the vehicle to dial in the exact position of your rear axle. It's built from strong 1.000" x 0.156" DOM mild steel tubing, fully TIG welded for solid construction, and features a 4140 heat-treated adjuster for durability. It also comes with new grease-able polyurethane bushings to absorb road vibrations and a tough powder coat finish to resist corrosion. Installation is straightforward with basic tools and typically takes less than 30 minutes, as it's designed as a direct fit with no modifications needed.

Just a heads-up, this specific panhard bar is designed for sedans and coupes, so it's not recommended for wagon models. Always double-check the center-to-center length to ensure it's the right fit for your project, as the length is adjustable between 30-7/8" and 31-7/8", with a standard length of 31-3/8".