UMI Performance 82-02 F-Body Non Adj. Lower Control Arms Panhard Bar w/ Roto-Joints

You're getting a set of UMI Performance lower control arms and a panhard bar, both equipped with UMI's Roto-Joints. These aren't your typical bushings; the Roto-Joints are designed to allow up to 28 degrees of rotation, giving your suspension unrestricted movement. This articulation is key to preventing suspension bind, which can lead to wheel hop and reduced traction, especially when you're pushing your 1982-2002 F-body Camaro hard.

The Roto-Joints themselves are built with a 4140 chromoly, hard chrome-plated ball that rotates within a durable Delrin race. This combination is made to handle wear from spirited driving and accumulated miles. The housing is also 4140 chromoly, TIG welded for strength. What's great about these joints is they're adjustable and completely rebuildable. If the Delrin race wears over time, you can tighten an adjuster ring or even replace the race itself. This kit is designed for maximum performance, offering extreme handling with no bushing deflection, which is a significant improvement over factory rubber or aftermarket polyurethane.

The included panhard bar is essential for keeping your rear end centered, especially if you've lowered your vehicle or are running larger tires. It features on-car adjustability thanks to left and right-hand threaded Roto-Joints, allowing you to make adjustments by simply loosening jam nuts and turning the bar. The panhard bar itself is constructed from DOM mild steel tubing with TIG-welded chromoly tube adapters. All the bushing ends and Roto-Joints are greaseable, making them low maintenance for a great street setup. The kit comes fully assembled and ready for installation, finished with a durable powder coat.