UMI Performance 93-02 F-Body Front Upper A-Arm Mounts Adjustable Coil Over Only

When you're looking to swap in coilovers on your 4th generation Camaro or Firebird, UMI Performance has you covered with these fabricated adjustable upper A-arm mounts. This kit directly replaces your original GM mount, making the conversion to coilovers much simpler. The two stand-off tabs are angled just right to accept any coilover that uses a bearing mount. You'll also find included spacers to properly fit coilover shocks with either a 1-inch or 1-1/4 inch wide bearing. UMI's unique fabricated design keeps these mounts strong without adding any extra weight over the factory parts.

What really sets these mounts apart is the adjustability they offer. You get three upper A-arm adjustment holes, allowing you to fine-tune your vehicle's front suspension and roll center. The original factory holes are in the center, but you can raise or lower the A-arm mounting point by 3/8 of an inch. Adjusting the roll center height can make your car feel more responsive and improve camber gain, which helps even a less aggressive street alignment perform better during cornering. For street and drag applications, using the center hole keeps the A-arm in its factory position. If you're aiming for maximum performance, pairing these with UMI's lower A-arms (P/N 2317 or 2314) lets you run a true bearing-to-bearing coilover setup.

These mounts are made from robust 3/16-inch steel, laser cut in the USA for accuracy, and finished with a durable black powder coat. They are designed as a direct bolt-on, meaning no drilling or welding is required for installation. They work with both factory and aftermarket A-arms, and are tested on UMI's own vehicles in tough conditions, making them a solid choice for everything from street cruisers to track cars.