UMI Performance 93-02 GM F-Body Front A-arm Kit Adjustable CrMo Drag Race

If you're setting up your 1993-2002 Camaro for serious drag strip duty, you know that every bit of weight savings and geometry refinement counts. This front A-arm kit from UMI Performance is built specifically for that purpose, offering a direct bolt-in solution that's lighter and stronger than the stock stamped arms.

These arms are constructed from 1-1/4" USA CrMo tubing, a strong material chosen for its durability under high stress. The upper arms feature a high-clearance geometry that tucks into the wheel well, allowing for maximum suspension travel when the front end comes up off the line. They also include an adjustable upper ball joint mount that adds +2 degrees of caster, which helps with straight-line stability. The lower arms are also built from CrMo and feature a redesigned tube configuration for safety and performance, whether you're powering through the traps or landing a wheelie. Both upper and lower arms come pre-assembled with heavy-duty ball joints and race-quality aluminum rod ends, saving you time and ensuring a solid connection. This kit saves a total of 11 lbs compared to the factory components.

This kit is designed to accept most major brands of racing coilovers with a 1/2" by 1-1/4" wide mount. It also includes provisions for a travel limiting chain, essential for drag racing setups. For those who still use their car on the street occasionally, there's an installed sway bar mount tab, and optional sway bar end links are available. The kit comes with a Grade 10.9 hardware kit, including bolts, washers, and Ny-lock nuts, for a secure installation. These arms maintain the factory track width and are available in a durable red or black powder coat finish.