Whiteline Plus 3/08+ Dodge Challenger / 11/05+ Charger Front 30mm Sway Bar Mount

When you're servicing the suspension on your 2005-2023 Chrysler 300, Dodge Challenger, Charger, or Magnum, replacing the sway bar mount bushings is a common and important step. These bushings are what hold your sway bar to the frame, and when they wear out, you can get extra body roll and a less connected feel when cornering. This kit from Whiteline gives you a fresh set of 30mm front sway bar mount bushings to get things feeling tight again.

Whiteline uses a well-built synthetic elastomer for these bushings, which is tough against oil, grease, ozone, and general weathering. They've also incorporated internal grease reservoirs that help keep the sway bar lubricated and reduce friction over time. To make sure they last even longer, this kit comes with a special extreme pressure molybdenum disulfide grease.

It's always a good idea to double-check your sway bar's diameter before ordering, as these bushings are specific to a 30mm size. Replacing these is a pretty straightforward job, often just requiring you to unbolt the old mounts, swap in the new bushings and grease, and bolt them back up.