1970 Dodge Challenger Brake Job Parts
Compare pads, rotors, and kits listed for your 1970 Dodge Challenger. Check front or rear position, pad material, included hardware, and trim fitment before ordering.
Brake Pads
(5)primary
Dynamic Friction
DFC 4000 HybriDynamic Brake Pads
$29.76
Dynamic Friction
R1 Optimum Oe Pads
$36.72
EBC
EBC 69-71 Chrysler 300 7.2 Redstuff Front Brake Pads
- Position
- Front
$183.01
EBC
EBC 71-72 Amc Ambassador 4.2 Greenstuff Front Brake Pads
- Position
- Front
$164.71
EBC
EBC 71-72 Amc Ambassador 4.2 Yellowstuff Front Brake Pads
- Position
- Front
$223.27
Brake Rotors
(7)primary
Bendix
BENDIX Brake Drum
$121.09
Bendix
BENDIX Brake Drum
$89.21
Centric Parts
C-Tek Standard Brake Drum
$64.27
Centric Parts
C-Tek Standard Brake Drum
$62.14
PowerStop
Power Stop 70-72 Dodge Challenger Front Evolution Drilled & Slotted Rotors - Pair
$311.54
Raybestos
Raybestos R-Line Brake Drum
$104.56
Raybestos
Raybestos R-Line Brake Drum
$57.15
Brake Kits
(25)primary
Wilwood
Wilwood Dynapro 6 Front Hub Kit 12.19in 62-72 CDP B & E Body-Drum
$1369.87
Wilwood
Wilwood Dynapro 6 Front Hub Kit 12.19in Drilled 62-72 CDP B & E Body-Drum
$1512.44
Wilwood
Wilwood Dynapro 6 Front Hub Kit 12.19in Drilled Red 62-72 CDP B & E Body-Drum
$1512.44
Wilwood
Wilwood Dynapro 6 Front Hub Kit 12.19in Red 62-72 CDP B & E Body-Drum
$1369.87
Wilwood
Wilwood Forged Dynalite Front Drag Kit Drilled Rotor 62-72 CDP B & E Body-Drum
$1024.10
Wilwood
Wilwood Forged Dynalite Front Kit 11.00in 62-72 CDP B & E Body-Drum
$1115.39
Wilwood
Wilwood Forged Dynalite Front Kit 11.00in Drilled 62-72 CDP B & E Body-Drum
$1257.96
Wilwood
Wilwood Forged Dynalite Front Kit 11.00in Drilled Red 62-72 CDP B & E Body-Drum
$1257.96
Brake Fluid
(49)consumable
ATP
ATP Automatic Transmission Oil Pump Seal
$6.77
Bosch
Bosch Oil Filter
$4.90
Bosch
Bosch Oil Filter
$6.32
Bosch
Bosch Oil Filter
$9.77
EcoGard
BULK OIL FILTERS
$4.27
Hayden
Engine Oil Cooler Metal Line Kit
$48.14
Hayden
Engine Oil Cooler Replacement Hose
$36.40
Gates
Engine Oil Filler Cap
$4.01
Brake Job Checklist for Your 1970 Dodge Challenger
Choose the axle first. Front and rear brake parts are usually different.
Compare pad material for your driving style, then inspect rotor wear before ordering.
Use a pad-and-rotor kit when both wear items are due on the same axle.
Brake Job for Other Dodge Challenger Years
Other Jobs for Your 1970 Dodge Challenger
Frequently Asked Questions
What parts do I need for a brake job on my 1970 Dodge Challenger?
A complete brake job on the 1970 Dodge Challenger usually starts with pads and rotors, then adds hardware or a pad-and-rotor kit as needed. Some vehicles use different front and rear brake parts, so confirm your trim and position before ordering.
Should I replace brake pads and rotors together on my 1970 Dodge Challenger?
If the rotors are worn, grooved, warped, or below minimum thickness, replace them with the pads. If the rotors are still in good condition, some brake jobs only need pads, but always inspect both sides of the axle before ordering.
Ceramic or semi-metallic brake pads: which should I choose?
Ceramic pads are usually quieter and create less visible dust for daily driving. Semi-metallic pads can handle heat well and are often chosen for heavier vehicles, towing, or more demanding driving. Match the pad type to your vehicle and how you use it.
Do I need front or rear brake pads for my 1970 Dodge Challenger?
Front and rear brake pads are usually different part numbers. Check which axle needs service, compare the product title and fitment notes, and order the matching front or rear set.
How long does a brake job take on a 1970 Dodge Challenger?
A brake job typically takes 2-4 hours and is rated as moderate difficulty. Actual time may vary depending on your experience and the specific parts being replaced.
Can I do a brake job myself?
A brake job is a moderate DIY project. If you have some mechanical experience and the right tools, you can handle it. Otherwise, consider having a professional do the work.
Are these parts guaranteed to fit my 1970 Dodge Challenger?
These parts are listed for the 1970 Dodge Challenger using manufacturer fitment data. Some products fit every trim, while others require trim confirmation. Use your trim in My Garage or the product page fitment checker to confirm exact fit.
What brands make brake job parts for the 1970 Dodge Challenger?
We carry brake job parts from trusted brands including Dynamic Friction, EBC, Bendix, Centric Parts, and PowerStop. Filter by brand to find your preferred manufacturer.
How much does a brake job cost for a 1970 Dodge Challenger?
The cost of a brake job for the 1970 Dodge Challenger depends on the parts and brands you choose. Browse the parts on this page to see current pricing. Doing the work yourself saves significantly on labor costs.