Question 1

What parts do I need for a brake job on my 1963 Mercedes-Benz 190C?

Accepted Answer

A complete brake job on the 1963 Mercedes-Benz 190C usually starts with pads and rotors, then adds hardware or a pad-and-rotor kit as needed. Some vehicles use different front and rear brake parts, so confirm your trim and position before ordering.

Question 2

Should I replace brake pads and rotors together on my 1963 Mercedes-Benz 190C?

Accepted Answer

If the rotors are worn, grooved, warped, or below minimum thickness, replace them with the pads. If the rotors are still in good condition, some brake jobs only need pads, but always inspect both sides of the axle before ordering.

Question 3

Ceramic or semi-metallic brake pads: which should I choose?

Accepted Answer

Ceramic pads are usually quieter and create less visible dust for daily driving. Semi-metallic pads can handle heat well and are often chosen for heavier vehicles, towing, or more demanding driving. Match the pad type to your vehicle and how you use it.

Question 4

Do I need front or rear brake pads for my 1963 Mercedes-Benz 190C?

Accepted Answer

Front and rear brake pads are usually different part numbers. Check which axle needs service, compare the product title and fitment notes, and order the matching front or rear set.

Question 5

How long does a brake job take on a 1963 Mercedes-Benz 190C?

Accepted Answer

A brake job typically takes 2-4 hours and is rated as moderate difficulty. Actual time may vary depending on your experience and the specific parts being replaced.

Question 6

Can I do a brake job myself?

Accepted Answer

A brake job is a moderate DIY project. If you have some mechanical experience and the right tools, you can handle it. Otherwise, consider having a professional do the work.

Question 7

Are these parts guaranteed to fit my 1963 Mercedes-Benz 190C?

Accepted Answer

These parts are listed for the 1963 Mercedes-Benz 190C using manufacturer fitment data. Some products fit every trim, while others require trim confirmation. Use your trim in My Garage or the product page fitment checker to confirm exact fit.

Question 8

What brands make brake job parts for the 1963 Mercedes-Benz 190C?

Accepted Answer

We carry brake job parts from trusted brands including Dynamic Friction, DFC, R1 Concepts, Dorman, and Beck Arnley. Filter by brand to find your preferred manufacturer.

Question 9

How much does a brake job cost for a 1963 Mercedes-Benz 190C?

Accepted Answer

The cost of a brake job for the 1963 Mercedes-Benz 190C depends on the parts and brands you choose. Browse the parts on this page to see current pricing. Doing the work yourself saves significantly on labor costs.

1963 Mercedes-Benz 190C Brake Job Parts

Brake Pads

DFC 4000 HybriDynamic Brake Pads

DFC 63-76 Alfa Romeo BERLINA Front 4000 HybriDynamic Brake Pads and Hardware Kit

DFC 63-76 Alfa Romeo Spider Front 5000 Advanced Low Metallic Brake Pads and Hardware Kit

DFC 63-76 Alfa Romeo Spider Front Active Performance Pads and Hardware Kit

DFC 63-76 Alfa Romeo Spider Front Euro 5000 Ceramic Brake Pads and Hardware Kit

DFC 63-94 Alfa Romeo MONTREAL Front Active Performance Pads - Low Metallic

DFC 63-94 Alfa Romeo Spider Front 5000 Advanced Low Metallic Brake Pads

DFC 63-94 Alfa Romeo Spider Front Euro 5000 Ceramic Brake Pads

Brake Rotors

DFC 61-67 Mercedes-Benz 190C Front Brake Rotor

DFC Brake Rotors - Blank

R1 61-67 Mercedes-Benz 190C Front Right Drilled & Slotted Black Brake Rotor

R1 61-67 Mercedes-Benz 200 Front Left Drilled & Slotted Black Brake Rotor

R1 61-67 Mercedes-Benz 190DC Front Brake Rotor Set

Brake Fluid

Oil Drain Plug Standard M26-1.50, Head Size 17Mm

OIL FILLER CAP

OIL FILTER

Brake Job Checklist for Your 1963 Mercedes-Benz 190C

Brake Job for Other Mercedes-Benz 190C Years

Other Jobs for Your 1963 Mercedes-Benz 190C

Frequently Asked Questions