Camburg 05-23 Toyota Tacoma Prerunner 2wd 4in. Performance L/T Spindle Kit (No Sway-bar Version)

Starting with a fully fabricated, internally gusseted boxed design, these Camburg performance spindles are built to be significantly stronger than the factory units. This is crucial because factory spindles are known to bend under the stress of off-road use, especially when you're running larger tires or using a mid-travel or long-travel suspension kit. These spindles are CNC machined and add a 4-inch lift while also being 3/4-inch wider per side. This wider stance helps correct spindle offset and provides more clearance for your upper control arms and larger tires. The updated steering arm angle is designed to reduce binding on the factory outer tie rods at full droop, allowing for more wheel travel.

This particular version is the non-sway bar mount, long-travel variant, which is stronger due to the absence of the sway bar mount. It's designed as a bolt-on replacement for your stock spindles, meaning no welding or cutting is required for installation. You'll gain ground clearance thanks to the integrated lift, and the kit includes longer stainless steel and Kevlar front brake lines because the stock ones will be too short. Camburg finishes these spindles with a durable powder coat for protection. When fitting larger tires, a zero offset wheel with 4.50-4.75 inches of backspacing is recommended for optimal clearance.

This kit is specifically for the 6-lug, rear-wheel-drive models of the Toyota Tacoma. It's important to note that these spindles are designed to replace OEM stock parts and will not work with drop-down bracket lift kits that utilize taller aftermarket knuckles.