Nitrous Express 8 Cyl Piranha Direct Port 4 Solenoids Nitrous Kit (200-500HP EFI Jets) w/12lb Bottle

This Nitrous Express direct port system uses 3/16 stainless hard lines for the nitrous distribution, a design choice that helps keep the nitrous in a dense liquid form. Sharp bends in the nitrous flow path can cause turbulence, leading to gaseous bubbles that reduce power. By using these stainless hard lines and nickel-plated fittings, this kit aims to minimize those sharp bends, ensuring you get the most power from every pound of nitrous used.

This kit is built for 8-cylinder EFI engines and is designed to add between 200 and 500 horsepower, depending on the included EFI jets. It features eight NX Piranha nozzles, two NX Lightning series nitrous solenoids, and two Lightning series fuel solenoids. The anodized aluminum distribution blocks and 6AN stainless braided nitrous feed lines are also included to manage the flow effectively. You'll also find a high-flow 6AN Y fitting, a wide-open throttle switch, 40 Amp relays with harnesses, and a master arming switch, along with every nut, bolt, and connector needed for installation.

The kit comes with a 12lb nitrous bottle to get you started. Remember that this system is not CARB approved and cannot be shipped to California. Always refer to the manufacturer's installation instructions for proper setup and safety procedures.