SPC Performance 99-05 VW Golf/Jetta/00-06 Audi TT Nylon Positive Camber Shim (1.0deg.)

This 1.00 degree nylon shim from SPC Performance is designed to adjust the rear camber on your Volkswagen or Audi. When you're trying to dial in your alignment, especially after lowering a vehicle or replacing suspension components, camber angles can get out of spec. This shim is a well-built piece that helps you bring that camber back into the desired range, allowing for better tire wear and handling characteristics.

You can use up to two of these shims per wheel to achieve finer adjustments, and by combining them with other shims, you can even correct toe angles by up to +/- 0.50 degrees. Keep in mind that installing these shims requires removing the hub assembly, and SPC Performance offers a specialized wrench (part 87530) that makes this process much easier by allowing the brake tone ring, bearing, seal, and hub to be removed as a single unit. Always check brake and rotor clearance after installation to avoid binding, and be aware that 75970 spacers might be needed in some applications.