UMI Performance 82-92 GM F-Body LSX Engine Swap Mounts

If you're swapping an LS engine into your 1982-1992 Chevrolet Camaro or Pontiac Firebird, these engine mounts from UMI Performance are designed to make the job much smoother. They position the LS engine into the factory Small Block Chevy location on your stock K-member, which is a common and well-understood placement for these swaps. This means you're not starting from scratch figuring out where everything should go.

These mounts are built from strong, laser-cut 3/16-inch and 1/4-inch thick USA steel, and they're jig-built to ensure accuracy. You get a clean, tight fit, and they offer about 3/4 of an inch of adjustment fore and aft. This flexibility is key during an engine swap, allowing you to fine-tune the engine's position for optimal clearance and driveline alignment. They're made to accept most engine-side mounts designed for a 1998-2002 Camaro, like UMI's own 2323 or 2328 mounts, or the GM 22179268 part.

For a complete swap, consider pairing these mounts with UMI's T56 transmission crossmember (part 2239). Everything is 100% made in the USA, so you know you're getting a well-built part.