Slime Tubeless Tire Sealant

As the SLiME treated tire rotates, centrifugal force pushes the sealant to the tread area creating a layer of protection, repairing punctures as they occur or treating existing punctures. SLiME utilizes a state-of-the-art blend of environmentally friendly fibers, binders, polymers and proprietary congealing agents which intertwine and clot within the puncture. This Fibro-Seal lattice, together with the viscous transportation system (the "green" goo) seeks out and tightly packs itself into the puncture, preventing and repairing flats with a flexible long lasting plug. SLiME is not intended for use in tires losing pressure from sidewall punctures, bead leaks, damaged rims or faulty valves. SLiME is recommended as a repair only in high speed, over-the-road tires.

NOTE: SLiME is not recommended for use in tires mounted on chrome wheels

Features:

• Repairs punctures up to ¼" (6mm) using Fibro-Seal™ technology

• Remains liquid inside the tire, coating the tread area as the tire rotates

• Non-toxic, non-hazardous, non-flammable, non-aerosol and water soluble

• Contains rust and corrosion inhibitors to maintain the integrity of the rim

• TPMS friendly (Note: May not install easily into tires with direct
  or valve mounted devices)

• Tires treated with SLiME can be cleaned out with water allowing
  for the installation of a proper plug/patch

• SLiME installs between the rim and the tire bead. Hold the bead open with two tire levers,
  install, and re-inflate with a fast burst of air to seat the bead to the rim.