Exhaust System Joint & Crack Sealer (5 oz.)
Temperature Resistance: 1000ºF continuous, 1500ºF intermittent
Curing Time: Let
set 2-4 hours. Full cure after 24 hours.
Exhaust System Joint and Crack Sealer cures by the evaporation
of water and further cures with heat.
Resistance: The fully cured product retains effective
properties when in contact with water
Storage: Store in a
cool, dry environment in unopened container
Keep from freezing. Avoid prolonged storage above 140ºF.
NOTE: This product should not be used in pure oxygen and/or oxygen rich systems and should not be used with chlorine or other strong oxidizing material.