Question 1

What parts do I need for a brake job on my 1988 Chevrolet Blazer?

Accepted Answer

A complete brake job on the 1988 Chevrolet Blazer usually starts with pads and rotors, then adds hardware or a pad-and-rotor kit as needed. Some vehicles use different front and rear brake parts, so confirm your trim and position before ordering.

Question 2

Should I replace brake pads and rotors together on my 1988 Chevrolet Blazer?

Accepted Answer

If the rotors are worn, grooved, warped, or below minimum thickness, replace them with the pads. If the rotors are still in good condition, some brake jobs only need pads, but always inspect both sides of the axle before ordering.

Question 3

Ceramic or semi-metallic brake pads: which should I choose?

Accepted Answer

Ceramic pads are usually quieter and create less visible dust for daily driving. Semi-metallic pads can handle heat well and are often chosen for heavier vehicles, towing, or more demanding driving. Match the pad type to your vehicle and how you use it.

Question 4

Do I need front or rear brake pads for my 1988 Chevrolet Blazer?

Accepted Answer

Front and rear brake pads are usually different part numbers. Check which axle needs service, compare the product title and fitment notes, and order the matching front or rear set.

Question 5

How long does a brake job take on a 1988 Chevrolet Blazer?

Accepted Answer

A brake job typically takes 2-4 hours and is rated as moderate difficulty. Actual time may vary depending on your experience and the specific parts being replaced.

Question 6

Can I do a brake job myself?

Accepted Answer

A brake job is a moderate DIY project. If you have some mechanical experience and the right tools, you can handle it. Otherwise, consider having a professional do the work.

Question 7

Are these parts guaranteed to fit my 1988 Chevrolet Blazer?

Accepted Answer

These parts are listed for the 1988 Chevrolet Blazer using manufacturer fitment data. Some products fit every trim, while others require trim confirmation. Use your trim in My Garage or the product page fitment checker to confirm exact fit.

Question 8

What brands make brake job parts for the 1988 Chevrolet Blazer?

Accepted Answer

We carry brake job parts from trusted brands including Bendix, Bosch, Centric Parts, Dynamic Friction, and DFC. Filter by brand to find your preferred manufacturer.

Question 9

How much does a brake job cost for a 1988 Chevrolet Blazer?

Accepted Answer

The cost of a brake job for the 1988 Chevrolet Blazer depends on the parts and brands you choose. Browse the parts on this page to see current pricing. Doing the work yourself saves significantly on labor costs.

1988 Chevrolet Blazer Brake Job Parts

Brake Pads

BENDIX Fleet MetLok Brake Pad

Bosch Brake Pads

Bosch QuietCast Brake Pads

Bosch QuietCast Brake Pads

Bosch Severe duty

Centric Premium Ceramic Brake Pads with Shims and Hardware

DFC 4000 HybriDynamic Brake Pads

DFC 67-02 Buick GS 400 Front 4000 HybriDynamic Brake Pads and Hardware Kit

Brake Rotors

BENDIX Disc Brake Rotor

C-Tek Standard Brake Drum

C-Tek Standard Brake Rotor

Centric GCX Rotor with Full Coating

Centric Premium High Carbon Alloy Brake Rotor

DFC 71-91 Chevrolet K10 Pickup Front Left Drilled & Slotted Silver Brake Rotor

DFC 71-91 Chevrolet V10 & V1500 Suburban Front Right Drilled & Slotted Silver Brake Rotor

DFC 71-91 Chevrolet V10 Front Brake Rotor

Brake Kits

Power Stop 71-74 Chevrolet Blazer Front Z23 Evolution Sport Brake Kit

Power Stop 71-74 Chevrolet Blazer Front Z26 Street Warrior Brake Kit

Wilwood D52 Front Caliper Kit - Black Ano 2.00 / 2.00in Piston 1.28in Rotor

Wilwood D52 Front Caliper Kit - Black Powder 2.00 / 2.00in Piston 1.28in Rotor

Wilwood D52 Front Caliper Kit - Red 2.00 / 2.00in Piston 1.28in Rotor

Brake Fluid

ATP Automatic Transmission Dipstick Tube Seal

ATP Automatic Transmission Oil Pump Seal

Bosch Oil Filter

Bosch Oil Filter

Engine Cylinder Block Lubricating Oil Pump Assembly

Engine Cylinder Block Lubricating Oil Pump Assembly

Engine Oil Cooler Hose Assembly