Lubegard Kooler Kleen Transmission Cooler Flush (13.25 oz)
Used, endorsed, and approved by
multiple OEMs to safely flush contaminants
from the transmission cooler lines
For use in all transmissions including
automatic, CVT, DCT and manual transmissions
Comes with a new 2-in-1 fitting
Prevents contamination of new
or rebuilt units
Removes grease, dirt, sludge,
grime and metal shavings
water or soapy residue to
contaminate new ATF fluid
for those that do not have
a flushing machine
not contain ozone
depleting chemicals or CFC’s
Does not contain chlorinated solvents
Formulated to not harm seals or
degrade new ATF fluid
SHIPPING: Can not ship 2nd Day
and can only ship in the 48 Continental United States
For Line Flush Cleaner: Attach connector to transmission feed line.
Next, attach hose to transmission return line to collect flush and
residue in a waste container. Hold can upright and actuate.
Flush until clear. For best results use entire content of can per installation.
Then turn can upside down and continue cleaning with air only.
For Wire Harness Cleaner: Cut off hose to appropriate length
to direct the stream. Spray over dirty depowered 6-12 volt
For Dielectric Protectant: Allow cleaned components to dry